Waters Network Systems MS1008-GLXSC Especificaciones descargar pdf (Pagina 49)

Waters Network Systems User’s Manual Page 49

PSX/MS1008 Models with Gigabit Uplink

The following table describes the Spanning Tree parameters.

Parameter Description

Priority You can change the priority value which is a value used to

identify the root bridge. The bridge with the lowest value has

the highest priority and is selected as the root. Enter a

number 1 through 65535.

Max Age You can change Max Age value, which is the number of

seconds a bridge waits without receiving Spanning-Tree

Protocol configuration messages before attempting a

reconfiguration. Enter a number 6 through 40.

Hello Time You can change Hello time value which is the number of

seconds between the transmissions of Spanning-Tree

Protocol configuration messages. Enter a number 1

through 10.

Forward Delay

time

You can change forward delay time, which is the number of

seconds a port waits before changing from its Spanning-Tree

Protocol learning and listening states to the forwarding state.

Enter a number 4 through 30.

The following parameters can be configured on each port. Click the Apply button

to modify.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 58 59

Sin comentarios

Waters Network Systems MS1008-GLXSC Especificaciones Pagina 49